TMI WARNING; In this post I will be talking about toilets and what goes into them. If you can’t talk poop…read another post.
When I started using the camping bidet (henceforth known as the bidet) instead of toilet paper, one thing I was not happy about was the wet and dripping behind. While it is a small thing to deal with in the face of a global pandemic it is slightly uncomfortable. As usual, I turned to the internet to research a work around. I had considered family cloths as an answer to the toilet paper problem, and decided they were too much work; with soaking and rinsing and individual washing, not to mention the smells (of which we have enough already). However, using family cloths to dry the bottom area after a good hosing with the bidet, that seemed to be an easily implemented answer.
From what I have read, it seems that all I need is some relatively soft fabric, capable of absorbing fluid and preferably made from a natural fibre. I looked through my fabric stash and found a likely candidate… an old flannelette sheet. I cut out some smallish squares (15cm X 15cm) and overlocked the edges to prevent fraying.
Next I found a container to hold the clean ones in the toilet and a bin and cloth bag to hold the used ones until wash day. The cloths will be washed with the underwear in a warm wash with soap nuts and lime essential oil.
This little project couldn’t have been any easier. Within an hour I felt like I had solved the problem. This is one easy way to solve the wet bottom problem.
We finally got around to putting the toilet on the biogas system. Mostly because the old pit toilet is VERY full (no pictures), and I developed a tummy bug over the weekend. These two factors in combination drove me to push everyone to throw together at least a temporary fix for the increasingly urgent problem of the full pit toilet.
The pit toilet has been great for about five and a half years. It took a month to build, and it was a great relief to have it finished at the time. If you click the links, you can read all about that adventure. Since the worms seem to no longer be living in the pit, and there are very few flies around (a worry of a deeper kind), the pit has filled to the point of being in danger of over flowing. We never did get the toilet building built, instead we continued to replace the tarp stretched over the top on a yearly basis.
The new biogas toilet will have a similar privacy situation, and the plan is to build a solid structure over it (but given our past experience, I don’t know when/if that will happen). The kit came with almost everything we needed, so instead of taking a month of labor (on and off) to build, it took me a frantic two hours (and a bit of help with lifting and drilling) to put the basics together.
First, I found a solid pallet in the useful pile in the sheep pen. This pallet will need to be replaced fairly soon as it is not made from hardwood, but it serves the purpose for the moment. The pedestal is bolted onto it using four roofing screws and another piece of timber under the screw holes to give it a bit of security. The pedestal feels solid and reliable, and the extra height brings it up to the western conventional position.
Secondly, the flush side of the plumbing was set up. I just pushed the inlet hoses onto the inlet spout on the toilet and put the filter on the pipe, then dropped the free end into an old bucket (with water in it). The bucket holds some precious second use water from the sink where we wash our hands. Usually we use this water on the garden, but we are forced to put some of it through the biogas system now.
The last step is to connect the outlet pipe to the toilet and feed about two metres of pipe into the unit to be sure the poop goes where it needs to go; to the bottom of the unit where the most bacteria live.
The toilet is operated by setting a switch to either a 1 or a 2 (I figured out that this is 1 for pee or 2 for poop) and pumping the handle up and down until everything goes away. It is comfortable and easy to use.
My next job is to connect the effluent pipe to a transpiration or mulch pit. Since we have been using only horse and occasionally dog poop in the unit (along with some food scraps) and the effluent is filtered through a chlorine tablet, I have been using it on the garden to feed all my plants. Now the human poop element has been added, I will have to divert the effluent to a mulch pit or another underground absorption situation. The tummy bug that made this job so urgent also means that I am introducing some not so human friendly bacteria into the unit and I don’t want to risk those bugs getting loose among the other humans of the house. Since my fairly useful partner is in town getting fittings for this phase of the job, I will make that the subject of another post.
The biogas situation at the moment is wonderful; I feed the unit about half a bucket of horse manure and any food scraps or dog poop I collect through the day (most food scraps go to the chooks though) and we can burn the methane for about two hours a day. I expect to get better gas once we are feeding the unit fresh manure (ours) rather than days old horse poop.
It’s finally warm enough to start setting up our biogas system. A few weeks ago we got one of our neighbors down to help us level a pad for the unit and we gathered together all the bits and pieces we needed to set up the first part of the unit (the digester and gas collector part), we will set up the cooker that came with the unit once it is producing gas. The toilet attachment will be installed as part three of this project as we have to wait until the unit is active before we add human manure to the mix.
The unit will be to the North of the humpy, close to the kitchen and right beside the toilet. That way the gas does not have to travel far and neither does the poop.
Next we laid down a ute mat made of rubber to protect the digester from any sharp stones that might be in the soil. The unit came with it’s own rubber mat, but we wanted to be sure it was protected. The extra rubber also insulates the unit from the cold soil a little.
Then it was time to put the pieces together and set up the unit itself. There is a really handy app that talks you through the whole process.
Filling the unit with water felt like a real achievement after all the brain work of putting the jig saw together. While it was filling up we got busy filling up the sand bags that become weights for the gas collector (the unit uses these weights to put the gas under low pressure so it is pushed through the gas line to the stove).
The following sequence of photos show fairly clearly how to fill and seal the bags so there is not much air in them. This is important as the pockets the bags go into are quite narrow and the bags have to be squeezed into them.
The unit will begin to bubble and produce methane over the next few weeks and we will add the gas line and the toilet as part of the next stage. Look out for the next installment in a fortnight…
We have been trying very hard to move away from using gas to sustain our daily life. We have historically used gas for running the fridge and for cooking and heating water on the gas stove. Recently we have upgraded our gas fridge to an electric fridge (solar powered) and now we are adding a biogas unit to the mix. This means that we will no longer have to buy gas bottles (yay!!), this is the final step away from using bottled gas.
Bottled gas or LPG (Liquid Petroleum Gas) is produced during oil refining and given the temporary nature of our supply of oil on this planet, we need to be looking at ways to move away from our reliance on it (not to mention the huge environmental cost of using it). LPG contains propane in Australia, in other countries LPG can be a mix of propane and butane.
Biogas captures methane and carbon dioxide (methane mostly) as a result of decomposition of organic matter. That is why the discovery of methane on Mars was such an exciting thing; where there are dead things there were once live things (usually, although not always and probably not in this case). I became interested in biogas many years ago (after watching an episode of The Good Life) and decided to work towards setting it up in our humpy. The idea that we could use our waste (of all descriptions) to generate some of our energy needs was very exciting.
The idea has been sitting on a dusty shelf at the back of my mind for years. Other, more attainable, goals have been on the work table of my mind. Six months ago (approximately) I stumbled upon a post advertising a biogas system designed for home use and the idea suddenly moved to the front of my mind again.
They are the only company selling these units in Australia and they are relatively close to us (only about three hours drive way). We saved up (in tiny increments) and finally, with a windfall of back pay, we ordered the unit. We also managed to add a toilet unit to the order. As soon as this unit is set up we can start to generate our own cooking gas (although the Year three student who lives in my head can’t help making jokes about cooking with farts).
As soon as the order was placed we realised we needed a site for the future toilet/gas generation unit. Then we need a shed or some kind of building to house the toilet and a pad for the gas unit to sit on.
The first part of our biogas adventure was picking it up and touring a working unit while we were there. The very helpful Brian at Quality Solar and Plumbing gave us a tour of the biogas unit he has set up at his house.
We have our unit home. It is sitting in it’s two little boxes, waiting for us to make it a home and set up the toilet. I can’t wait to get it going.
The kit is supposed to include everything we need to put it all together. We will see…
At last we have restarted work on the long planned five star pit toilet. It has become increasingly urgent for us to have a new toilet hole (the old one is getting uncomfortably near the end of it’s usefulness). Over the previous month or so we have all had a go at digging the pit deeper and wider, and it is almost deep enough at last. Today my (fairly reluctant) partner and eldest daughter were chased outside to begin building the framing for cement frame that will support the floor over the pit. Once the cementing is completed we will lay the floor over the pit (two sheets of really thick ply wood with a hole drilled in one), organize a pedestal (of some sort), put up a temporary shelter and it will be usable. The building part will be put together over the next six months or so.
The start of the frame for cement ‘stem walls’ to hold the floor up above the moisture and stuff.
The finished frame work, ready for cement.
The two sheets of ply for the floor,
Nothing to do with toilets, but our baby guinea fowls have grown up enough to be out in the yard with their mum.
Everyone watches the cement mixer go around and around and around and…
Six or seven mixes later.
It’s almost full.
Smoothing out the top.
Roady (the butcher bird) fancies himself a building inspector.
Last minute touch ups after the dogs and sheep have inspected the work.
We admire our work as the sun goes down.
The next stage is to dig some more out of the pit (the deeper the better) and to begin the building of the toilet. I look forward to it.
Just updating this post with a photo or two of the recent digging.
The hole is now 1.4 x 0.8 x 0.9 m; a tiny bit over one cubic metre of hole (I think)
My eldest daughter busily scooping out gravelly soil.
This may be a bit of a taboo subject in polite society…but it is a very important subject for those of us who choose to be responsible for as much of our own lives as possible; toilet designs. Until recently I have been happy using a short-drop toilet design on our block; this consists of a vase shaped hole about 1.25 meters deep, 60 cm wide at the bottom and tapering to about 40 cm wide at the top. On top of this pit is placed a movable pedestal made from half a plastic live barrel with a toilet seat bolted on top. A tarp stretched over a poly pipe hoop frame completes the set up. We ‘flush’ by sprinkling a can of lime over the contents to lower the pH and make the contents more worm friendly and less fly friendly. This kind of toilet means that I have to dig a new hole every school holidays.
Lately I have been experimenting with adding compost worms to the mix. Once a new hole is dug and in use for a week or so, I tip in one container of compost worms from the worm farm at school. This makes the hole last roughly twice as long as previously; presently 20 weeks is the record. This means I have to dig less and can avoid the deconstructing and reconstructing of the toilet for a bit longer.
My new plan consists of digging a big enough pit to hold a year’s worth of…well….contents, and adding worms to that. I am hoping this will allow enough time for the worms to reduce the contents to worm castings and baby worms, which will then burrow away to seek a new life in a far off place, thus keeping the pit level to an acceptable level permanently (or at least a very long time). Then I can build a more permanent and attractive structure over the top of the pit.
According to the World Health Organisation Pit Latrine Designs, when digging a pit toilet you should allow 0.06 m3 per person per year. In our house that equates to (0.06 x 4 = 0.24 m3) to allow for visitor usage as well. This isn’t a huge hole really. I have calculated this to be about the size of a 240 liter fridge.
I am currently digging away at the pit for this toilet and will post more photos as I get to each stage. The ground is very hard at the moment due to the dry weather so going is slow. The next question will be “What do I build the toilet shed out of?”
Do you take responsibility for your own waste? Would you like to? Any ideas or comments welcome.