tablet weaving

Sewing myself a new file bag for work

/ gardengoddess17 / 3 Comments

Now that I have the fabric and the card woven strap made for my file bag, I can start the sewing-it-together step. I decided to keep the pattern I had rather than making another strap (laziness).

I found a really good tutorial for making a messenger bag on YouTube which I am going to (loosely) follow.

First I cut out a single piece for the two sides of my bag and a piece for the flap. I also cut corresponding pieces of lining material and some cotton batting I was lucky enough to find. I sewed the batting to the lining pieces to make them easier to handle.

Then I sewed the side seams of the bag up and made those cute little corners (like I did for the tote bag). I did the same for the lining pieces. I also sewed the flap pieces together, right sides facing but leaving the top edge open so I could turn it inside out and top stitch.

Then I fiddled around with the best way to put all the pieces together so I could sew up the around-the-mouth seam of the bag. That one seam attached the handle, the flap and the inner and outer pieces together, but only if they were in the correct order.

Eventually I figured out the sequence (and then didn’t photograph it, but it’s the same sequence as in the tutorial video) and sewed the whole thing together. I turned it all right side out through a small hole I had left in the seam for the purpose.

After the small hole was sewn shut, I had my bag.

I have really enjoyed this little project and it has come together much faster than I would expect. No, it’s not perfect; the seams are wonky and some of the weaving is a bit dodgy, but I made it, I had fun doing it and I have something useful at the end of it. What more can I ask from life?

Card weaving straps for a new file bag

/ gardengoddess17 / Leave a comment

The waffle weave fabric is finished, I’m pleased with the result. It is a really spongy feeling fabric with a lot of character (rather like myself). Now to make some straps for the bag…

The finished waffle weave fabric

I decided to card weave some straps for handles because I haven’t used my inkle loom for a while and I’m on an if-you-don’t-use-it-throw-it-out kick (yes…I know that’s not the way to use the strategy, but it made sense to me). First I went looking for cotton yarn to match my fabric…

Then I played around with a pattern…

Card weaving patterns are easy to read; the numbers represent cards and the letters represent holes in the cards. In theory, if you thread your cards right you will get the pattern on the grid. Well… there is one thing I forgot to do; the empty squares under the numbers are to indicate whether the cards are threaded from back to front or front to back. It has been a while since I used this method, so I forgot that bit and it does make a difference.

You can see the letters on the cards in this photo
All threaded ready to go
That is not the pattern I threaded

The direction the cards are threaded makes a big difference to the outcome. Apparently it twists the yarn in the opposite direction making the pattern look completely different. I should have threaded card 1 from the back, card 2 from the front, card 3 from the back…and so on. I will finish this band and see how I feel about the new pattern. Maybe I will make another one, but the new pattern may grow on me (or I may be too lazy to do another one).

Next post will be about me sewing the bag together.

Learning to card weave

/ gardengoddess17 / 2 Comments

Another journey of exploration for me… card weaving. Also known as tablet weaving, this art has been used to make straps and decorative edges for centuries (there is nothing new under the sun). I first read about it while researching naelbinding (or needle binding) and other Viking textile methods. I have yet to perfect the art of making socks with a horn needle and wool (naelbinding) but I did give tablet weaving a go. I made a short lead for Shaun and a long lead for Sid and am now in the process of making a collar and lead set for my daughter’s dog; Val.

The basics sound deceptively easy; just make some cards with a hole in each corner. I used old milk bottles to make mine, the plastic is thin but strong and I can write on them with a permanent marker. My cards are two and a half inches square with the holes a half inch in from the corner.

Then thread them up according to the draft pattern. I decided to start with a really simple one that gives ovals.

The warp (the long bits of yarn you weave through) is tied to two fixed points (or one to your belt and one to your toe) and away you go.

Simply turn the cards forwards or backwards (depending on the pattern) to open new sheds (the gap you put the weft [the bits of yarn that goes from side to side in weaving] through).

I have learned some lessons on this journey…

My cards, made from cut up milk bottles

First and most importantly- don’t let your warp threads get twisted or you end up with a huge mess and a red face (possibly high blood pressure too). Eventually I figured out that cutting each card’s worth of warp and pegging them individually to a coat hanger was quicker than cutting big numbers of each colour then sorting them out later.

My first mess of warp strings…waiting to be sorted out.

Now I just cut them and peg the until I am ready to thread.

Secondly- It is much easier to move when you aren’t tied to a door, or life is easier with a loom. I made a simple frame for my card weaving warp after my first weaving session. This simple loom is made from PVC pipe and 90 degree angle joiners. It works really well and I no longer take ten minutes to get free of the warp so I can answer the phone, check on a squawk from outside or go to the loo.

A really simple card weaving loom

Thirdly- keep your cards all together with a clip when you advance the warp to weave a new bit. If you don’t you could end up having to untangle a pile of warp threads all over again (I did).

This handy clip keeps the cards all aligned and neat when I’m not weaving and when I move the warp up.

Lastly- be prepared to be endlessly awed by the beautiful bands you can make with just a simple warp and some bits of plastic.

Shaun’s lead on the loom

The finished lead, I love the patterns and it is so strong.

The second attempt at a lead. I made a few mistakes in the card turning, but it’s strong and useful anyway.

Sid loves it, because it’s longer than Shaun’s and he can graze as we walk.

The third attempt. This will be part of a collar and lead set for Val; my daughter’s dog.

As you can see I’m far from an expert, my selvages are still messy and I miss threaded one card on the latest warp (the pink dot in the green circles), but I am getting better at it and enjoying the process. Life is good when I can learn new things.

Oh and Book Book (my youngest daughter’s hen) is sitting on a nest in an old chest of draws, no…not in the house. She will hatch some lovely champagne frizzles soon and I will have chickens to watch again.