I am busily using up scrap yarn from my overflowing stash. As part of that I wove a piece of fabric that is frankly…um…mixed up; I used all sorts of fancy yarns in the weft, eyelash yarn, boucle yarn and a little bit of ladder yarn. All that in no particular order, colour or pattern, just throwing in a little bit here and there.
What to do with this fabric? I decided to make a tote bag.
First I cut it off the loom and overlocked the edges.
Next I cut a lining the same size and some handle material.
Then it was time to sew up both the bag and the lining into basic bag shapes. Leaving a small hole in the bottom of the lining to turn the whole thing inside out.
Sewing across the bottom corners gives the bag a nice square bottom. I didn’t forget to measure the same distance down the corner seam on each piece. I sewed the lining corners the same way.
The corners were folded so that the bottom seam and the side seam lay on top of each other; the seam you can see in the photo below is the side seam, it is laying on top of the bottom seam. This makes a sort of cross seam at the base of the bag.
Finally I sewed the top of the outer bag to the inner lining. The handles can be pinned between these layers. I went over the handle joins more than once when sewing this part; handle joins are subject to a lot of strain. The handles need to be looped downwards with the ends facing up towards the top of the bag, when sewing the top seam (I learned that the hard way).
I turned it all inside out (or right side out) then sewed up the hole.
There’s the bag done. Not too bad for a scrap yarn project.
3 thoughts on “Make a tote bag from hand woven fabric”
good on you, thats nice! x
Thank you. New things to do keeps me interested.